Product Description
Introduction
The wear tester is used to conduct wear tests according to specifications such as ASTM D4966, JIS L10096, ISO 17704, and others at a specified cycle rate of 47.5 ± 2.5 cycles per minute (CPM).
This equipment is used for conducting wear tests on woven and knitted fabrics, non-woven/ethylene materials, leather, belts, gloves, socks, laminated boards, painted surfaces, and a wide range of other materials. The tester has a counter for automatic cycle counting and stopping, and it operates on 120 volts.
Compliant with standards
ASTM D4970, ISO 12945.2, ISO 2034
GB/T 4802.2/13775/21196.1/21196.2
ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690
ISO 12947.1/12947.2 M&S P17/P19/P19C NEXT 18/18a/18b
ISO 5470-2 IWTO-40
JIS L1096 8.17.5 Method E Woolmark TM 112/196
BS EN 388/530/13770
Scope of Application
It can detect the wear resistance and pilling performance of various fabrics. Under a certain pressure, the sample and the specified abrasive material perform continuous alternating friction. The wear and pilling degree are evaluated by comparing with standard parameters. The touchscreen controls are equipped with a fully functional programmer, which can pre-program batches and total counts, and separately set the count for each test head; four speeds including the standard speed can be selected.
ASTM D4970 ISO 12945 Wear Tester FZ/T 20020 BS 3424 Leather Belts Gloves Socks Materials Wear Test Machine
